TEAMGROUP MP44 M.2 PCIe 4.0 NVMe Internal SSD (M.2 2280)

Capacity

Price

$329.99

Per TB$165.00

AmazonBuy on Amazon

Reasons to buy

  • PCIe 4.0 x4 NVMe speeds with TEAMGROUP-rated sequential reads up to 7,000 MB/s and writes up to 6,000 MB/s on the published family table.
  • Capacities from 1 TB through 8 TB in a single M.2 2280 line for large game libraries, media archives, and workstation scratch space.
  • Patented graphene heat label under 1 mm thick that TEAMGROUP positions as a complement to motherboard M.2 heatsinks.
  • Five-year limited warranty with published TBW steps from 500 TB (1 TB) up to 4,000 TB (8 TB) on TEAMGROUP's specification table.
  • No onboard DRAM design with SLC caching and HMB keeps BOM cost down versus DRAM-equipped flagships while staying competitive on sequential throughput.

Reasons to avoid

  • Amazon and marketplace pricing varies widely by capacity, so the 8 TB SKU can look expensive per terabyte until you catch a promotion.
  • No factory heatsink on these bare M.2 SKUs, so PlayStation 5, laptops, and tight ITX cases still need a compatible cooler for safe thermals.
  • Peak brochure speeds require a PCIe 4.0 slot, updated BIOS, and good cooling; older Gen3-only boards will not deliver full Gen4 bandwidth.
  • Endurance and TBW claims follow TEAMGROUP's JEDEC-based methodology, which can differ from third-party endurance estimates you see on review sites.
TEAMGROUP MP44 M.2 PCIe 4.0 NVMe Internal SSD (M.2 2280) (2 TB) — product photo
2 TB

Specifications

series
MP44
interface
PCIe 4.0 x4 (NVMe)
mtbf hours
1600000
form factor
M.2 2280
manufacturer
TEAMGROUP
warranty notes
Five-year limited warranty or stated TBW, whichever comes first; confirm regional terms on TEAMGROUP SSD support before purchase.
warranty years
5

Researched and maintained by Hard Drive Prices Editorial Team. · Updated June 5, 2026

User ratings

  • Amazon
    4.7(427)

What you're getting

The TEAMGROUP MP44 is a PCIe 4.0 x4 NVMe M.2 2280 solid-state drive built for desktops, laptops, compact NUC systems, and other hosts that need fast internal flash without a 2.5-inch SATA cable. TEAMGROUP rates the line up to 7,000 MB/s sequential read and 6,000 MB/s sequential write on its published capacity table, with per-model peaks up to 7,400 MB/s read on larger SKUs in Newegg and datasheet materials.

The drive uses 3D TLC NAND with an SLC write cache and no onboard DRAM. Host Memory Buffer (HMB) helps the controller manage hot data, while TEAMGROUP's sub-1 mm graphene heat label is meant to complement a motherboard M.2 heatsink rather than replace airflow in sustained workloads. Capacities in this listing run from 1 TB through 8 TB, with published endurance from 500 TBW at 1 TB to 4,000 TBW at 8 TB on TEAMGROUP's comparison table.

Management and warranty follow TEAMGROUP's consumer SSD playbook. The company ships S.M.A.R.T. monitoring software, LDPC error correction, and a five-year limited warranty tied to the stated TBW for each capacity. Operating temperature is rated 0 C to 70 C, and TEAMGROUP notes that BIOS updates and slot compatibility checks matter on older Intel and AMD boards before you install a Gen4 drive.

This family competes in the value-oriented PCIe Gen4 segment against drives like the Crucial P3 Plus and WD Black SN770. Street pricing swings sharply by capacity, especially on the 8 TB model, so compare the live cart total and $/TB math for your workload before you buy.

Buying context

Typical value (not live pricing)

Per-terabyte cost usually improves as you step from 1 TB toward 4 TB, while the 8 TB SKU carries a steep absolute price even when sales land. At research time Amazon showed about $187 for 1 TB, about $330 for 2 TB, about $516 for 4 TB, and about $1,590 for 8 TB on the linked ASINs, but marketplace sellers change daily. Re-check live cart pricing and $/TB before checkout.

Where this line often shows up

  • Windows 11 and Linux gaming PCs with a spare M.2 2280 PCIe Gen4 slot for Steam and Epic libraries.
  • PlayStation 5 internal upgrades when paired with a Sony-compatible M.2 heatsink and verified compatibility.
  • Compact Intel NUC or mini-PC builds that need fast NVMe storage without a 2.5-inch drive bay.
  • Video editing scratch disks on workstations that move large ProRes or RAW clips from fast internal flash.
  • NAS or homelab hosts with M.2 cache tiers when the board exposes a Gen4 x4 NVMe slot.

Features

  • Gen4 bandwidth: PCIe 4.0 x4 NVMe interface with TEAMGROUP-rated sequential performance up to 7,000 MB/s read and 6,000 MB/s write on the family comparison chart.

  • High-capacity options: 1 TB, 2 TB, 4 TB, and 8 TB models share the MP44 controller platform and M.2 2280 form factor.

  • SLC caching: TLC NAND with SLC write cache to absorb burst writes before folding back to direct-to-TLC speeds when the cache fills.

  • Graphene thermal label: Patented sub-1 mm graphene label designed to work with onboard M.2 heatsinks on desktop motherboards.

  • Host Memory Buffer: DRAM-less layout that uses system memory through HMB for mapping hot data on supported hosts.

  • TEAMGROUP software: S.M.A.R.T. monitoring utility plus LDPC, garbage collection, and E2E data protection in the firmware stack.